The rear wheel and gearbox are the two essential parts of a motorcycle that give it the power to reach any place. However, running these two things are only possible when you have a maintained Motorcycle chain.
We, at Siima MotoWear have done our homework and we present you with 5 essential tips and tricks to give a long life to your motorcycle chain.
Taking care of the motorcycle chain not only gives it the ability to work smoothly, but it also prevents the other two significant parts of the motorcycle from working better for as long as possible. Therefore, riders should need to know about the tips and tricks that work for them.
Suppose you are the one who wants to know about the Tips and Tricks of the Motorcycle Chain. In that case, this article will be best for you because we are telling you about legit tips and tricks that will cut-off your investments on a motor-mechanic.
5 Essential Tips and Tricks:
Lubrication:
Suppose the use of a motorcycle is evident in your daily life routine. In that case, it’s good to ensure the motorcycle chain's long life and peak performance. For that, you have to do the lubrication of the chain after every 600 miles of the ride.
It’s good to perform the trick after riding the motorcycle for better results, and doing it before riding the motorcycle will not give enough time to the solvents to evaporate perfectly. It’s essential to stand your bike on a paddock stand because the wheels should rotate during the lubrication time.
Make sure to do the coating of the chain with the help of a thin grease or lube. The spray nozzles need to be aimed inside the chain. Simultaneously, rotate the wheel until the grease or lube does not include throughout the chain area. Make sure to use high-quality products for better results.
Cleaning:
It’s essential to clean out the chain before performing the lubrication of the chain. Because the grit and dirt combination will create a hard paste, which will damage or decrease the chain's life. If it’s impossible for you, you can consider cleaning the chain after every 1000 miles of motorcycle riding.
However, make sure not to use the cleaners that contain petroleum-based ingredients. It will seal the chain of the motorcycle, and you might get into other major motorcycle issues.
A sponge or nylon brush is a useful tool to do the cleaning of the motorcycle chain. Moreover, never take the help of a wire brush to perform motorcycle chain cleaning. After completing the cleaning process, make sure to use clean water thoroughly on the chain.
Inspection:
The adjustment of your motorcycle chain is essential before the time you start riding on it. Any chain damages need to be analyzed to ensure the stability of the chain. You can get the help of the Motorcycle company handbook to take advice for adjustment and inspection purposes.
You can also rotate the rear wheel of your motorcycle to check about the tight spots. Let say the rotation is not free; it’s the time to install a new motorcycle chain on it. Apart from that, the rust spots and the rear sprocket should also need to be checked simultaneously.
Checking the Chain Cleaning Frequency:
The chain cleaning frequency is another vital thing that needs to be the up-to-the-mark. However, it should be understood that the frequency of chain cleaning is different for seasons, climate conditions, and the riding style.
The frequency will always be higher when you have a harsh riding style or live in a coastal area. Therefore, you can consider a generic guideline to lube or clean the chain after every 800kms of riding.
It would help if you understood that a dirty looking machine with healthy internals is far better than a good looking machine with poor mechanicals.
Perfect Selection of Tools:
It’s good to become wiser when selecting the tools to clean the Motorcycle Chain. It should be understood to all the riders that their motorcycle chain types are, and they are putting on it.
According to the experts, most motorcycles come with 0-ring, X-ring, and Z-ring chain. These type of chains does contain internal lubrication from the company side. Hence, all this remains on the chain until its life.
Moreover, the Lubricants you are using for the cleaning purpose needs to be ideal for the seal. Any low quality or harsh lubricant could attack the seal. Therefore, cleaning the chain daily in such situations won’t give you the desired results.
The compatibility of the product also plays an essential role in the maintenance of the Motorcycle chain. It will contact different parts of the motorcycle near the chain area, such as rubber pipes, steel components, aluminum rims, and other plastic parts. The low-compatible products could damage all the extra features of the bikes that will let you invest in their maintenance.
Also, two types of chain cleaning components come, such as water-based and solvent-based. You should need to know about the working capabilities of both. Hence, you could achieve the best results for yourself.
Do you know any useful tips and tricks to prolong your chain's longevity and stay safe? Leave your comments below.
